Introduction
Installing a different bathroom may possibly seem to be a daunting job, but with the appropriate equipment and expertise, it might be a straightforward approach. On this stage-by-step guideline, We'll walk you through the process of installing a whole new bathroom in your bathroom. Whether you are replacing an outdated toilet or setting up just one for the first time, this information will give you all the data you need to correctly total the set up.
Step 1: Assemble Your Instruments and Materials
Before you start, it is necessary to collect all the required applications and resources. Here's a list of products you will require:
- New toilet Wax ring Adjustable wrench Screwdriver Level Hacksaw Bucket Towels
Step two: Eliminate the Outdated Toilet
The initial step in putting in a completely new bathroom is to get rid of the previous one particular. Observe these steps to safely take out your outdated bathroom:
Shut off the water supply: Track down the drinking water shut-off valve powering the bathroom and switch it clockwise to shut off the h2o provide.
Empty the tank: Flush the rest room to eliminate just as much h2o as you can from your tank. Use a sponge or towel to soak up any remaining water.
Disconnect the water source line: Use an adjustable wrench to loosen and disconnect the drinking water provide line from The underside with the tank.
Remove the tank: Unscrew and remove the bolts that hold the tank on the bowl. Cautiously lift off the tank and set it apart.
Remove the bowl: Unscrew and take away the bolts at The bottom of your rest room bowl. Rock the bowl gently backward and forward to break it cost-free from the wax seal. Elevate from the bowl and area it over a towel or within a bucket.
Step 3: Prepare for Installation
Now that you have eradicated the old bathroom, it is time to put together with the set up of The brand new one particular. Adhere to these ways to prepare:
Inspect the flange: Check out the flange, that's the circular piece that connects the toilet into the waste pipe. Be certain that it truly is in excellent condition and securely fastened to the floor. If it is ruined or loose, you may need to exchange or mend it.
Clean the area: Thoroughly clean the area the place the rest room is going to be put in. Remove any previous wax or particles through the flange and ground.
Measure for placement: Utilize a tape measure to determine the distance through the wall to the middle with the flange. This measurement will let you appropriately posture your new rest room.
Step four: Install the New Toilet
With all of the preparations complete, it's time to put in your new bathroom. Abide by these steps for An effective installation:
Install the wax ring: Position a completely new wax ring onto the flange, making certain that it's centered and protected.
Position the toilet: Thoroughly lessen the bathroom bowl on to the wax ring, ensuring that that it aligns Together with the bolt holes about the flange.
Secure with bolts: Insert and tighten bolts in the foundation of your rest room bowl and in the flange. Watch out not to overtighten, as This will crack the porcelain.
Attach tank: Spot the tank onto